مترجم سایت

ULINK2 ARM emulator امولاتور

ویژگی ها

Feature

Debugging Features
RAM Breakpoints	Unlimited
ROM Breakpoints (ARM7/9)	2 max
ROM Breakpoints (Cortex-M3)	8 max
ROM Breakpoints (µPSD) (Cannot Set While Executing)	n/a
ROM Breakpoints (XC800) (Cannot Set While Executing)	n/a
ROM Breakpoints (XC166)	n/a
Execution Breakpoints (Set While Executing)
Access Breakpoints (ARM7/9)	2 max (R/W Only, With Value)
Access Breakpoints (Cortex-M3)	4 max (With value)
Access Breakpoints (µPSD)	n/a
Access Breakpoints (XC800)	n/a
Access Breakpoints (XC166)	n/a
Debugging Support
Real-Time Agent
Serial Wire Debug (Cortex-Mx)
Data Trace (Cortex-M3) (Serial Wire Viewer)
Instruction Trace (Cortex-M3) (Embedded Trace Macrocell - ETM)
Performance
JTAG Clock	<= 50MHz
Memory R/W	≈ 1MB/s
Flash R/W	32KB/s
Data Trace Streaming	800Mb/s
Connectors
10-pin (0.05") (Cortex Debug Connector)
20-pin (0.1") (ARM Standard JTAG Connector)
20-pin (0.05") (Cortex Debug+ETM Connector)
16-pin (0.1") (Infineon OCDS Connector)
14-pin (0.1") (ST µPSD Connector)
I/O Voltage Range	1.2V - 3.3V
Supported Device Families
XC800 (8051)
µPSD (8051)
XC166/XE166/XC2000
LPC950 (8051)
ARM7
ARM9
Cortex-M0
Cortex-M1
Cortex-M3
Cortex-M4

KEIL ARM emulator supporting ARM's RealView MDK latest emulator used is ULink upgraded version of the emulator. kEIL ARM emulator not only has all the features ULINK emulator, but also increased the Serial Debug (SWD) support, return clock support, and real-time agent functions. Development engineers using a combination of RealView MDK debugger and kEIL ARM emulator, you can easily carry on the target hardware chip debugging (using on-chip JTAG, SWD, and OCDS), Flash programming ...
 kEIL ARM emulator new featuresULINK2 standard Windows USB driver support Plug and PlaySupport for ARM Cortex-M3-based serial debugSupports read and write memory during program execution, terminal emulation, and serial debug outputSupports 10-pin cable (also supports 20-pin connector)
 kEIL ARM emulator main functions:USB interface high-speed downloading user codeStorage Area / register ViewRapid single-step runA variety of program breakpointsChip Flash
 The Keil ULINKproDebug and Trace Unit connects your PC's USB port to your target system (via a JTAG, Cortex Debug, or Cortex Debug + ETM connector). It allows you to program, debug, and analyze your applications using its unique streaming trace technology.ULINKpro, together withMDK-ARM, provides extended on-the-fly debug capabilities for Cortex-M devices. You are able to control the processor, set breakpoints, and read / write memory contents, all while the processor is running at full speed. High-Speed ​​data and instruction trace are streamed directly to your PC enabling you to analyze detailed program behaviour.Features

    Supports ARM7, ARM9, Cortex-M0, Cortex-M1, Cortex-M3, and Cortex-M4 devices
    JTAG support for ARM7, ARM9, and Cortex-M
    Serial Wire Debug (SWD) support for Cortex-M
    Serial Wire Viewer (SWV) Data and EventTrace for Cortex-M up to 100Mbit / s (Manchester mode)
    Instruction Trace (ETM) for Cortex-M3 and Cortex-M4 up to 800Mbit / s
    UniqueStreaming Tracedirect to your PC, provides unlimited trace buffer
    JTAG Clock Speed ​​up to 50MHz
    Supports Cortex-M devices running at up to 200MHz
    High-Speed ​​Memory Read / Write up to 1MBytes/sec
    Seamless integration with the KeilμVisionIDE & Debugger
    Wide target voltage range: 1.2V - 3.3V, 5V tolerant
    Support for 5V only devices using optional5V Adapter
    OptionalIsolation Adapterprovides electrical isolation from the target system
    USB 2.0 High-Speed ​​connection
    USB powered (no power supply required)
    TargetConnectors
        10-pin (0.05 ") - Cortex Debug Connector
        20-pin (0.10 ") - ARM Standard JTAG Connector
        20-pin (0.05 ") - Cortex Debug + ETM Connector

خریدULINK2

خرید ULINK2

مشخصاتULINK2

مشخصات ULINK2

مشاوره قبل از خرید در مورد: ULINK2 ARM emulator امولاتور
نام:
تلفن و موبایل:
ایمیل:
پیام:	با سلام خواهشمند است با سپاس فراوان
عدد امنیتی:
جهت اطمینان؛ آدرس ip شما نیز، ارسال می‌شود.